[wguttrid]

Hi guys (and girls) am researching potential machine to run similar parts as the attached picture. Essentially it is several circles cut out of a 4x8 sheet of 3/4" plywood, along with 30 - 1/2 dia. holes.

Not familiar with CNC routers and not sure what type of machine would be required in a production setting (m/c running 8 hours per day) and approximately how many 4x8 sheets could be processed in a days shift.

As always cost is a factor which is why the Shopbot PRsalpha models look promising versus an expensive Multicam type brute.

Hopefully someone can make some machine recomenedations along with approximate parts per hour.

Thanks for all the help.