[piksooo]

hello ....

I am a student, and I have to do a postprocessor for GILDEMEISTER GAC 65 .. I have a question about it.

1. Separation of g-code, depending on the tools used. Is it possible to do it and how?

Here's the beginning and after being more questions

Thanks for your help

[piksooo]

No one here to help?? pleaseeee

[SolidCAM_13]

You might need to more specific!
For example you can split the G-Code by simply adding "Splits" after certain operations in SolidCAM. This wouldn’t even need a post modification.. But, as I said, you will need to more specific about what your trying to achieve!

[piksooo]

I really should get a g-code as this:

%4
N 99 V{!=(NIPEL VORLAUF)}
$1 N11 G92 X46.465 T11
$2 N21 G92 X40.373 T12
$3 N31 G92 X49.631 Z49.72 I0.4 K0.4 T13
$4 N41 G92 X41.73 Z53.7 I0.4 K0.4 T14
$1 N12 G14
$2 N22 G14
$3 N32 G14 Q1
$4 N42 G14 Q1
$5 N51 G14 Q2
$3 $4 $5 N111 G59 X0 Z55.3
N 112 M97
N 113 G909
N 114 G61 H{E1[1]==0} N116
N 115 M97
$5 N53 V{!=(GRANICENJE)} L45
$3 N33 V{!=(GRUBO TOKARENJE)} L43
$4 N43 V{!=(FINO TOKARENJE)} L44
$2 N23 V{!=(ODREZIVANJE)} L42
$1 N13 V{!=(BRID)} L41
N 116 M97
$5 N501 G61 H{E1[3]==0} N120
$5 N502 M9 M5
$5 N503 M0
N 120 M97
N 125 G61 N111
N 122 M30
~
%41
$1 N10 V{!=(BRID)}
$1 N20 G92 X46.465 T11
$1 N30 G62 Q4 U44 N395
$1 N40 G0 X14
$1 N50 G62 Q2 U42 N70
$1 N60 G1 G95 X7 F0.05
$1 N80 G0 X90
$1 N90 G14 Q1
$1 N110 M30
~
%42
$2 N10 V{!=(ODREZIVANJE)}
$2 N20 G92 X40.373 T12
$2 N30 G62 Q3 U43 N460
$2 N40 G0 X15
$2 N50 G62 Q4 U44 N380
$2 N60 G1 G95 X6.9 F0.05
$2 N70 G1 X7.5
$2 N80 G62 Q1 U41 N80
$2 N90 G1 G95 X4 F0.05
$2 N100 G64
$2 N110 G0 X90
$2 N120 G14 Q1
$2 N130 M5 M9
$2 N140 M30
~

%45
N 1 V{!=(RS)}
N 10 V{!=(GRANICENJE)}
$5 N20 G92 X1.11 Z136.0 T101
$5 N30 M5 M9
$5 N35 G61 H{E1[2]==1} N70
$5 N40 G0 X0 Z5
$5 N50 G94 Z0.15 F2000
$5 N60 M36
$5 N70 G4 F3.0
$5 N80 M37
$5 N90 G4 F1.0
$5 N100 G95
$5 N110 G14 Q2
$5 N120 M30
~

%43
$3 N10 V{!=(GRUBO TOKARENJE)}
$3 N20 G92 X49.631 Z49.72 I0.4 K0.4 T13
$3 N30 G0 Z0.05
$3 N40 G62 Q5 U45 N110
$3 N50 G95 F0.15 S2500 M3 M8
$3 N60 G0 X14
$3 N70 G1 X4 F0.15
$3 N80 G0 Z1
$3 N90 G0 X10.
$3 N140 G1 Z-20.4 F0.1
$3 N150 G1 X10.5 Z-21
$3 N160 G1 Z-24.7
$3 N170 G1 X13
$3 N200 G0 Z1
$3 N210 G0 X7.5
$3 N220 G1 X10.5 Z-4.5 F0.1
$3 N230 G1 X11
$3 N240 G0 Z1.5
$3 N250 G0 X4.300
$3 N260 G1 G42 Z0.100 F0.1
$3 N270 G1 X6.781
$3 N280 G4 F0.1
$3 N290 G3 Z-0.253 X7.737 R0.5
$3 N300 G1 Z-3.086 X9.479
$3 N310 G3 Z-3.200 X9.600 R0.8
$3 N320 G1 Z-4.400
$3 N330 G1 Z-5.400 X8.400
$3 N340 G1 Z-19.900 X8.400
$3 N350 G2 Z-20.547 X8.876 R1
$3 N360 G3 Z-22.488 X10.300 R3
$3 N370 G1 Z-24.650 X10.300
$3 N380 G1 X11.150
$3 N390 G3 Z-24.850 X11.550 R0.2
$3 N400 G1 G40 Z-26.200
$3 N410 G1 X9.800 Z-28.900
$3 N420 G1 X10.800 Z-29.900
$3 N430 G1 Z-52.700 F0.1
$3 N440 G1 X15
$3 N450 G14 Q1
$3 N460 G0 Z0.05
$3 N490 M30
~
%44
$4 N10 V{!=(FINO TOKARENJE)}
$4 N20 G92 X47.40 Z40.0 I0.4 K0.4 T14
$4 N30 G95 F0.1 M8
$4 N40 G0 Z0.02
$4 N50 G62 Q3 U43 N400
$4 N55 G0 X14
$4 N60 G1 X4 F0.1
$4 N70 G0 Z1.5
$4 N80 G1 G42 Z0.000 F0.1
$4 N90 G1 X6.481
$4 N100 G4 F0.1
$4 N110 G3 Z-0.3530 X7.437 R0.5
$4 N120 G1 Z-3.1858 X9.179
$4 N130 G3 Z-4.0850 X8.542 R0.8
$4 N140 G2 Z-4.5000 X8.100 R0.5
$4 N150 G1 Z-20. X8.100
$4 N160 G2 Z-20.647 X8.576 R1
$4 N170 G3 Z-22.588 X10.000 R3
$4 N180 G1 Z-24.75 X10.000
$4 N190 G1 X10.850
$4 N200 G3 Z-24.95 X11.250 R0.2
$4 N210 G1 G40 Z-26.1 F0.1
$4 N220 G3 Z-28.0551 X9.234 R2.4
$4 N230 G2 Z-28.1365 X9.150 R0.1
$4 N240 G1 Z-33.6191 X9.150
$4 N250 G4 F0.1
$4 N260 G3 Z-34.3553 X10.009 R0.6
$4 N270 G1 Z-35.9584 X9.150
$4 N280 G1 Z-38.6191 X9.150
$4 N290 G4 F0.1
$4 N300 G3 Z-39.3553 X10.009 R0.6
$4 N310 G1 Z-40.9584 X9.150
$4 N320 G1 Z-43.6191 X9.150
$4 N330 G4 F0.1
$4 N340 G3 Z-44.3553 X10.009 R0.6
$4 N350 G1 Z-46.3206 X8.956
$4 N360 G1 Z-52.4000 X6.949
$4 N370 G1 Z-52.8
$4 N380 G1 X14
$4 N390 G14 Q1
$4 N395 G0 Z0.02
$4 N400 M30
~%


tag $1, $2, $3, $4, $5 mark with which axis will be processing.

i have turned on "gen_procs" in .mac file so i get separated process, so that is ok, but i need that tag in g-cod...

i have tray write command

if job_machine_type eq Turning
blknum_letter = '$2 N'
endif

if job_machine_type eq Drilling
blknum_letter = '$5 N'
endif

but i always get all processes with the $2 N... mark