Hello
I am looking for advice from those who are familiar with masterwood. I recently started using our masterwood project 416K with RhinoCam 2.0 and I am fine with flat stock parts and such, but I am looking at doing some 3D surfacing which is also all good other than the run times. I have researched and know that the slow times are partially because of RhinoCam. Reason being is that our current versions uses linear segments to represent z-axis arcs. This can be fixed by upgrading but this leads me into my problem. I have noticed that the machine does not know G18 or G19. Does anyone know how masterwood handles these or if it is possible to create an actual z-axis arc on a masterwood?