509,671 active members
4,190 visitors online
Register for free
Login
IndustryArena Forum > Tools / Tooling Technology > CNC Tooling > sellecting bit to cut laminated paper
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Aug 2010
    Posts
    0

    sellecting bit to cut laminated paper

    currently using 1/4" compression bit 2 spiral to cut 1/2" corrugated paper.
    need smooth finish top and bottom. Would like to make cut smaller ie 3/16"
    Any suggestions? Most compression bits I have found are no smaller than
    1/4" dia 1/4 shank and 7/8" deep. Any problems with this idea? Feed rate
    is 750

  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Posts
    34607
    Onsrud makes a 3/16" compression, but it's a single flute, so may slow you down a bit. They may make a two flute, but i didn't have time to look.
    http://www.toolsxp.com/Onsrud-Cutter...s-60-100SE.asp
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Similar Threads

  1. Laminated Beam
    By lgroulx200 in forum DIY CNC Router Table Machines
    Replies: 0
    Last Post: 10-24-2006, 03:43 AM
  2. square laminated or toroid transformer?
    By freak_brain in forum General CNC Machine Related Electronics
    Replies: 7
    Last Post: 07-10-2005, 01:12 AM
  3. paper jig
    By David454 in forum Uncategorised CAM Discussion
    Replies: 4
    Last Post: 04-18-2003, 08:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •