[nuai]

Hi guy, this is my first time trying to do a chamfering toolpath with MasterCam X2, When i trying to generate the toolpath i get these warning ( Entry: ramp Contour, chamfer and 3d are not enabled. Upgrade to level 1 is required. ) what these warning really mean and how to make it work ?

[foxsquirrel]

Hi guy, this is my first time trying to do a chamfering toolpath with MasterCam X2, When i trying to generate the toolpath i get these warning ( Entry: ramp Contour, chamfer and 3d are not enabled. Upgrade to level 1 is required. ) what these warning really mean and how to make it work ?

On the start up splash screen what level does it say you are licensed for?

[nuai]

Hi foxsquirrel,
On the start up splash screen it say : ( Design ,Mill Level 3 ,Lathe Level 3 ,Wire EDM Level 3 ,Router Level 3 ) What is these level mean anyway ?

[Superman]

On the start up splash screen it say : ( Design ,Mill Level 3 ,Lathe Level 3 ,Wire EDM Level 3 ,Router Level 3 ) What is these level mean anyway ?

It means that the info that you just gave is not right.
Lathe, Router, and Wire levels don't go that high.

Has your installation been done by a reseller, or yourself ?

many reasons can cause that error
- bad installation
- wrong tool selected or defined incorrectly
- wrong settings in the operation

What skill level are you at with CAD and CAM systems ?

[nuai]

It means that the info that you just gave is not right.
Lathe, Router, and Wire levels don't go that high.

Has your installation been done by a reseller, or yourself ?

many reasons can cause that error
- bad installation
- wrong tool selected or defined incorrectly
- wrong settings in the operation

What skill level are you at with CAD and CAM systems ?

Hi, superman
any idea how to fix these problem, BTW my CAD & CAM skill level are acceptable, not that good but i think i can make a part from a drawing to final machining , I'm just trying MasterCam and see how it work.

[Mike Mattera]

"I'm just trying MasterCam and see how it work."

Bootlegger Alert!

Mike Mattera

[cad01]

"I'm just trying MasterCam and see how it work."

Bootlegger Alert!

Mike Mattera

stole the words right out of my mouth.

contact your reseller and try it the right (legal) way.

[nuai]

I just format the whole system and reinstall the program, yep! Superman you are right it just a bad instalation, now don't get the anoying warning anymore. Thank guy for your help.