Thanks in advance. Sorry if this is in the wrong area. I started in a new shop last week. There is no inspector. I set up a twin spindle twin turret my first day and ran an 800 piece order over the next two shifts. They were all sent back today.

I did a full inspection of my first ten parts and gave turn over. I directly looked at each person I gave turn over to, went thru the part, tool lists and set up sheets. I asked them if they had any questions and they said no. I admit I did not document anything. When I asked about inspection sheets I was told by the owner “ we don’t have those”.

So I will now make my own. I am happy with the sheets. My main question is how do you all set the quantities to be inspected? For example a certain feature is 1 every 10 or once an hour.

Thanks so much.