Hey there friends,
I just purchased a Shopsabre 4860 that is about 4 years old. Does anyone have an assembly manual for this model I can take a look at? Any help would be greatly appreciated!
Thread: Need help with a 4860
Results 1 to 8 of 8
-
09-07-2010, 02:03 PM #1
Registered
- Join Date
- Aug 2010
- Posts
- 0
Need help with a 4860
-
09-24-2010, 02:10 PM #2
Registered
- Join Date
- Mar 2009
- Posts
- 20
I have the manual you are talking about, still need it? can email or ship a copy if you want.
-
01-29-2011, 09:04 PM #3
Registered
- Join Date
- Apr 2008
- Posts
- 35
sell while you can!
-
02-18-2011, 12:13 AM #4
Registered
- Join Date
- Feb 2011
- Posts
- 17
You should have bought a new one.. ShopSabre is a good brand but if I remember correctly they come fully assembled... why is it disassembled?
-
02-18-2011, 12:59 AM #5
Registered
- Join Date
- Mar 2009
- Posts
- 20
You are mistaken, There is some assembly, the gantry needs to be placed. The used machines can be great too.
-
05-25-2011, 03:03 PM #6
Registered
- Join Date
- Feb 2011
- Posts
- 17
I called around and I found that there should be no assembly required... ShopSabre ships fully assembled with no Gantry installation neeeded unless you requested it shipped disassembled.
Originally Posted by whipper
Just wanted to give you a heads up.
-
08-01-2011, 10:15 AM #7
Registered
- Join Date
- Mar 2009
- Posts
- 20
Do you have a Shop Sabre from four years ago? read the manual? or just an online source of good will? The guy is asking for help and you can't wait to tell him that he is screwed.
-
08-17-2011, 10:29 PM #8
Registered
- Join Date
- Feb 2011
- Posts
- 17
Call ShopSabre.. I am sure the will help
I am not trying to tell anyone they are screwed. Maybe I dont know what I thought I did but I am sure they wont tell you your screwed.
Reply With Quote
Posting Permissions
