hi guys,I am going to buy a 4x4 plasmacam machine , and I am asking if there is a way to make it 4x8 and how . I prefer the lagre size like Samson , but Unfortunately it is over my budget ,so any advise or info will be very appreciated .
hi guys,I am going to buy a 4x4 plasmacam machine , and I am asking if there is a way to make it 4x8 and how . I prefer the lagre size like Samson , but Unfortunately it is over my budget ,so any advise or info will be very appreciated .
thank very much for your info geo4932 , I will try this .
I own a plasmacam 4x4 and have recieved parts for expension to 4x8.
I would like any info you have about the process, and I will recipercate with pics and details of how I went about it.
Just started the process of converting my Plasmacam 4x4 table to 4x8.
Looks like a full time effort of 2 days if I paint and add water trays
hardsteel,
If you have a working DHC 4x4 Plasmacam table. There's one thing you need. I don't believe table size is restricted in 3.11 software.
1) Left and Right 8' gear rack)
If you have a working DHC2 4x4 Plasmacam table. There's two things you need with 4.20 software. Many more options in 4.20.
1) Left and Right 8' gear rack)
2) Customizable Size Software.
Call this number (719) 676-2700
Building Gotorch table here.
Vern