I am wondering will either thc below

http://www.candcnc.com/LCTHC.html
http://www.candcnc.com/UBOB.htm

will work with high frequency plasma cutter (ht2000)
https://www.hypertherm.com/en/Produc...sma/ht2000.jsp

also second question.. i was comparing the difference between lcthc and dthc

one of difference for Torch Volts Resolution for dthc is 0.25 volt while the lcthc is 1 volt

is that adjustable importain for larger industrial machine?

Thanks
Dan