Hi everyone, I have a Chiron FZ08 that is showing an X axis torque alarm (409). The axis feels very free when moved by hand but under power the axis alarms after only a few mm. The Fanuc drive is a dual axis unit and the Y axis functions perfectly. Does anyone have any ideas... please?
Thread: Chiron X Axis Torque Alarm 409
Results 1 to 3 of 3
Threaded View
-
09-20-2010, 12:21 PM #1
Registered
- Join Date
- Feb 2010
- Posts
- 0
Chiron X Axis Torque Alarm 409
Reply With QuoteSimilar Threads
-
NEED HEELP ALARM #414 Y AXIS SERVO ALARM?
By PICMAN in forum FanucReplies: 6Last Post: 04-29-2011, 11:20 PM -
Alarm 409-servo alarm- z axis torque alm
By jessebpm in forum Hyundai KiaReplies: 3Last Post: 06-15-2010, 01:45 AM -
X axis torque alarm on Takisawa Lathe
By lkenney in forum MetalWork DiscussionReplies: 3Last Post: 08-27-2009, 08:14 PM -
Puma 10S torque limiter alarm question
By fv74 in forum Daewoo/DoosanReplies: 1Last Post: 05-11-2007, 09:13 AM -
Which axis needs more torque (X,Y,Z)??
By campaX in forum DIY CNC Router Table MachinesReplies: 4Last Post: 07-31-2003, 07:28 PM
Tags for this Thread
Posting Permissions
