[AirChunk]

Can you open , with bobcadcam V21, a .dwg file that was created in autocad?

[The Engine Guy]

Can you open , with bobcadcam V21, a .dwg file that was created in autocad?

Yes, you should be able to open it OK, only thing that may be a problem is what version of Autocad it is, if it`s an older one should be OK but possible a newer version might not work.

DXF files are usually easiest to open if you can get the file in that format.

Regards
Rob
:rainfro::rainfro::rainfro:

[Claude Boudreau]

I have never try them but if everything else fail , you might want to try this.
http://www.freedownloadscenter.com/M..._Download.html

[BurrMan]

If V21 WILL open dwg's, just not the latest versions, I would use Autodesk's TrueView 2010. It will have a conversion command to convert them into an earlier version...

DesignReview 2010 will also add some very cool annotation and info sharing to the drawings also...

Both free from Autodesk...