586,106 active members*
3,140 visitors online*
Register for free
Login

Thread: 31i Modal cancel after reset

Results 1 to 4 of 4
  1. 04-08-2017, 02:01 PM #1
    Beaker
    Beaker is offline Registered
    Join Date
    Feb 2006
    Posts
    77

    31i Modal cancel after reset

    Hi All,
    Is there such a parameter for a 31i control that after a reset mid program,
    all modal G codes cancel or return to start up default.
    Cheers
    Beaker
    Reply With Quote Reply With Quote
  2. 04-09-2017, 10:08 AM #2
    sinha_nsit
    sinha_nsit is offline Registered
    Join Date
    Feb 2006
    Posts
    1792

    Re: 31i Modal cancel after reset

    It always happens with Reset.
    If it is not happening on your machine then there might be some parameter dictating a different behavior.
    Reply With Quote Reply With Quote
  3. 04-10-2017, 12:03 PM #3
    Beaker
    Beaker is offline Registered
    Join Date
    Feb 2006
    Posts
    77

    Re: 31i Modal cancel after reset

    Ok so with a good dose of fanuc literature, parameter 3402.6=1 fixed my problem.
    Reply With Quote Reply With Quote
  4. 04-10-2017, 04:58 PM #4
    sinha_nsit
    sinha_nsit is offline Registered
    Join Date
    Feb 2006
    Posts
    1792

    Re: 31i Modal cancel after reset

    0 or 1?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. which is default : G65 or G64 ?
    By deadlykitten in forum Okuma
    Replies: 2
    Last Post: 07-22-2016, 05:45 PM
  2. Default Feed
    By Podunk in forum BobCad-Cam
    Replies: 0
    Last Post: 02-07-2016, 01:05 AM
  3. Default to Workoffset 1 instead of 0.
    By dfearnow in forum Mastercam
    Replies: 1
    Last Post: 12-10-2015, 08:09 AM
  4. TL-1 RPM default
    By missinglink in forum Haas Lathes
    Replies: 4
    Last Post: 06-14-2013, 02:36 PM
  5. default units
    By canadamaxxer in forum Solidworks
    Replies: 11
    Last Post: 10-07-2010, 07:05 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules