[Andy NC]

Hi,

£200 GBP NC code will be perfect (i.e. right first time)
Can trade via web and PayPAL for security.

Let me know what you think

Andy

[lerken]

Can you make me a postprocessor AlphACAM - Record 2 NUM750.
I have the old one made for DOS. Is that of any help ?

[Andy NC]

If it was a DOS post processor for the DOS version of AlphaCAM (which was called APS) it will automatically be converted once AlphaCAM is loaded. No need to buy a new one.
Simply ensure the old LicomDAT folder is on the PC you are installing AlphaCAM onto and the installation procedure should take care of everything.

If its not for APS then its useless to me. I can make a new one in this case.
You will need to send me details of the machine...
Number of spindles
Number of vertical drills
Number of X axis horizontal drills
Number of Y axis horizontal drills
Saw unit details etc.

Does the machine have 2 vacuum zones?

I will be happy to send test NC programs from the post processor for you to test.

Andy

[lerken]

I send you all info. that you need.
it is better to send directly to your emailadress
My emailadress
[email protected]
can you mail me???

[lerken]

[IMG]Data[/IMG]

If it was a DOS post processor for the DOS version of AlphaCAM (which was called APS) it will automatically be converted once AlphaCAM is loaded. No need to buy a new one.
Simply ensure the old LicomDAT folder is on the PC you are installing AlphaCAM onto and the installation procedure should take care of everything.

If its not for APS then its useless to me. I can make a new one in this case.
You will need to send me details of the machine...
Number of spindles
Number of vertical drills
Number of X axis horizontal drills
Number of Y axis horizontal drills
Saw unit details etc.

Does the machine have 2 vacuum zones?

I will be happy to send test NC programs from the post processor for you to test.

Andy

[lerken]

Can you make a postprocessor out of the data I gave you ?

lerken

[Andy NC]

Num 750. Poor quality photocopies but enough to get started.
Will send a sample program very soon.

Andy NC

[Tuohye]

Andy NC,

Attached is Manual containing G codes and canned cycles for my
machine.Wont be using any pocketing cycles for machining just using canned
cycles for drilling,peck drilling,boring,tapping and reaming.
Can you let me know me you have enough information,sorry for the delay as
I was away.

Tuohye

[bubbafax]

Salve ho bisogno di un postprocessor per Alphacam
Ho un controllo Siemens Sinumerik 840 di. Puoi aiutarmi

[Fjespamer]

Hola Andy NC ,leí por el sitio que vos podés hacer un postprocesador para alphacam , tengo un SCM tech z25 que utiliza xilog plus y no puedo hacer que funcione con alphacam , me podrías decir si podés y cuánto vale hacer el posprocesador.
Mi correo es [email protected]

[senado]

Hello, I have seen your problem with CNC. I have the same problem with my 5 axes machine Balestrini Spider (C axe is overstrocke)
How did you solved the problem? Thanks on help! Senad

[senado]

Hello Andy, I am Senad from Bosnia nad Herzogovina.

I have bought a Balestrini Spider 5 axis CNC machine (4 axis +1 interpl.) produced 1997. As machine old, I also get it without PC and programs. I see some installations on NUM 1040 like PROCAM, main program is also there...
I have just Post Processor Balestrini manual (book) in Italian. I have seen some installations by a floppy or CD needed to be done on root direct. C:\ALPHAxx\STARTUP\MENUBALESTRINI
also a make a map like C:\LICOMDAT\MPOSTS.ALP

It is visible that with machine I did not get program AlphaCAM (some version 1997-2001) and Post Processor. Can you help me with this as otherwise I must install something different.
I have seen on those very old post you have expiriance and maybe this old data which can help me as well!

Thanks in advance!

Senad

[Iztok_7]

Hi Senad,
We also have an old Balestrini-Spider, Year 2000, and often have troubles with NUM drivers.
Perhaps we could exchange contacts, so we may possibly also exchange different solutions and experiences,
Looking forward hearing from you
Iztok
([email protected])