Need some help, I have just gotten BobCad and will need a post processor as well as some idea how to connect it (my Shark and computer). I was told some of you have been doing this for some time so please pass on what you have learned.
I will be getting a larger CMC after the first of the year, that's when our new building will be done. I have tons of work and looking all the help you folks can / will provide!!
Thanks in advance,
peg_legs
(Mike)
Results 1 to 2 of 2
-
10-07-2010, 12:13 PM #1
Registered
- Join Date
- Oct 2010
- Posts
- 0
Which post processor works with BobCad and Shark Pro
-
10-07-2010, 03:48 PM #2
Registered
- Join Date
- Feb 2009
- Posts
- 68
if you don't get any replies here, try the Bobcad support forum.
Reply With QuoteSimilar Threads
-
with bobcad v23 post processor
By cncpilot in forum FadalReplies: 2Last Post: 05-20-2010, 11:24 PM -
Bobcad as a post-processor?
By parkerbender in forum BobCad-CamReplies: 7Last Post: 03-27-2010, 10:47 AM -
BobCAD-CAM v23 Mach3 Post Processor
By ShineMachineCo. in forum Screen Layouts, Post Processors & MiscReplies: 1Last Post: 08-01-2009, 04:42 AM -
BobCad-Cam v19 post processor installation
By goodeye in forum BobCad-CamReplies: 1Last Post: 11-24-2007, 03:33 AM -
BobCAD-CAM v17 post processor help
By johnmac in forum BobCad-CamReplies: 8Last Post: 10-10-2007, 09:29 PM
Posting Permissions
