[jaximus1]

Hi, I just bought a new HAAS VF-2D Vertical CNC Mill and don't have the post processor for MasterCam V9.

This is my second CNC, the first is a Frank Pheonix PC based control for which I have the Mcam V9 Post for (came with the machine).

I am using X2 MR2 as well but I just use the updatepost utility in X2 MR2 for my Pheonix Mill V9 post.

I want to do the same with the HAAS CNC but don't know where to get the post.

Is there a generic post processor that comes with Mastercam that will work for it? Or do I need to get the Post from somewhere else?

[Argent]

I believe an mpfanuc post processor comes with MC9 and that should get you started. When I get to work I will grab my Haas VF-2 mpfanuc post processor and post it for you.

[jaximus1]

That would be much appreciated! thanks for the reply.. If you can include the .txt file aswell since mcam V9 uses it. I will then update the post in X2MR2 and be able to program using both versions... Thanks for your help.

-Jack

[schlegels]

We could use this for our mill as well, did you ever find it?

[jaximus1]

here is the post I use that works great with the Haas.

just use McamX or newer to update the post. You don't need the txt file usually assosiated with the Mcam 9 version .pst . just rename the .zip to a .pst

-Jack