I know this subject has been hit a few times but I want to find some software I can take some art and convert it to a DXF or what ever is needed to import it into autocad 2004. Who has used what with good results???
Thread: scanned art to DXF
Results 1 to 4 of 4
-
06-22-2005, 01:35 PM #1
Registered
- Join Date
- Sep 2004
- Posts
- 222
scanned art to DXF
-
06-22-2005, 03:46 PM #2
Registered
- Join Date
- Aug 2003
- Posts
- 812
Adobe streamline has worked best for me. I forget the price... was under 200.
-
06-22-2005, 04:05 PM #3
Registered
- Join Date
- Jul 2004
- Posts
- 93
Corel trace is a good raster to vector program,
you can download a 30day demo from them
use it all the time.IF ITS NOT BROKE YOUR NOT TRYING HARD ENOUGH
Ashes to ashes , dust to dust , If it wasnt for Harleys the fast lane would rust.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
06-23-2005, 06:09 AM #4
Registered
- Join Date
- Sep 2004
- Posts
- 222
thanks for the info. I looked at corel but don't remember seeing where it can convert to a dxf from a scanned drawing. I will have to look at that and adobe closer.
Reply With QuoteSimilar Threads
-
G-Code to DXF
By WayneHill in forum OpenSource SoftwareReplies: 227Last Post: 05-19-2021, 11:26 PM -
DXF Catalog
By CNCdude in forum News AnnouncementsReplies: 2Last Post: 08-27-2004, 03:07 AM -
DXF or PLT files
By signIT in forum DIY CNC Router Table MachinesReplies: 1Last Post: 07-01-2004, 10:57 PM -
3D dxf files
By NeoMiller in forum Uncategorised CAM DiscussionReplies: 6Last Post: 11-06-2003, 04:42 PM
Posting Permissions
