we are a high school vocational Machine Trades class with an early 1980's Takasawa vertical CNC Milling machine with a Fanuc 11M controller.
The mill has always been dependable, we even had all of the students use it already this school year. We had not used it though for about 3-4 weeks then went to start it up this past week and the screen did not come up at all?? I powered down the machine thinking it was a fluke, but still no screen.
this is where we are at right now:
1. I have removed and checked every fuse i can find with an ohm meter
2. when we power down the machine, the screen flashes green for a split second.
3. when the machine is powered up
** it does not let us move the table, home the machine or anything else.
** all fans, hydraulics, etc. seem to come up fine.
** 7-segment LED display on the "motherboard" has a "9" displayed.
Like i said before, we are a High School, so as you can guess our budget is very tight. any help or suggestions of what to check next would be greatly appreciated.
Thank you,
J.D. - Instructor