[BustedKnuckle]

Hi! I have a 1997 Hurco Bmc 30 with ultimax 3 control, I was wondering if there is anybody in the wiltshire area, that would have time to come and train me how to use it, I am new to cnc, I have started to do some things like tool setup and part set up, but the part programming stage is very daunting!! Thanks!!

[glovebox20]

Hello

I'm not from your area, but if you have programing question's, I'll try to point you in the right direction. Earthier start a thread on this forum or PM me.

glovebox20

[Rally]

Do you have the training manual? If not I may be able to come up with a copy.

[xray34]

I am new to cnc, I have started to do some things like tool setup and part set up, but the part programming stage is very daunting!! Thanks!!

Hurco's conversational language is excellent and a great place to start to learn CNC...
I have 2 hurcos and this forum has helped me no end in knowledge and confidence with Hurco's programming.
The G-Code side is very different but unless your doing very complex 3d machining everything can be done very quickly with the conversational side.
If you got the manuals with the Hurco they are also a great place to start.

All the best and welcome to the forums.
:-)

[jetski]

Bustedknuckle I have a good training manual. Email me and I will send you a sample page. You will like it much more that the Hurco version. [email protected]