My Gantry Mill with Fanuc 18m Controls was working fine yesterday morning. Now it is as if the ( + ) key is enabled and will not disengage. I've hard reset the machine numerous times, and checked to see if the key was stuck. As soon as I press the Jog or Home button, then select an axis the machine begins moving in the ( + ) direction. Is there a way to soft reset the CPU ? Any help would be appreciated. Thanks.
Results 1 to 3 of 3
-
10-21-2010, 02:18 PM #1
Registered
- Join Date
- Feb 2010
- Posts
- 16
Fanuc 18m (+) Button Enabled Continuously
-
10-21-2010, 02:20 PM #2
Registered
- Join Date
- Feb 2010
- Posts
- 16
PS. Each axis moves in the ( + ) direction when they are selected. I can move each axis in both directions using MPG.
-
10-21-2010, 03:24 PM #3
Registered
- Join Date
- Feb 2010
- Posts
- 16
A little more info: Last week on 10/14 I installed a repaired power supply by Tri Star CNC. the machine was working fine, but looking back in the Alarm History, since the power supply was installed I have an alarm indicating ' 971 - NMI OCCURRED IN SLC '.
Reply With QuoteSimilar Threads
-
Fanuc 10M, EMG Display On, EMG Button OK, Rev 6-29
By JimBoyce in forum FanucReplies: 2Last Post: 02-24-2011, 08:22 PM -
multicam 3000 tool holder breaking continuously
By schantal in forum Commercial CNC Wood RoutersReplies: 3Last Post: 10-19-2008, 05:33 PM -
Fanuc OiMC PWE could not get enabled?
By rai in forum FanucReplies: 4Last Post: 07-25-2008, 05:57 PM -
Fanuc Oi-TC Control, can't use measure button??
By Darc in forum FanucReplies: 13Last Post: 02-19-2007, 06:09 AM -
Fanuc OT control Auto Button
By thardy in forum FanucReplies: 3Last Post: 11-12-2006, 04:52 PM
Tags for this Thread
Posting Permissions
