I am going to use emc2 to run a form grinder the operator needs to run the same program but have some change-able variables. I will use pyVCP to setup spin boxes to change these variable. how do i link them to the m1nn files. Example is GrindFullDepth is entered by operator so i would need
g01 x(grindfulldepth)
as a code but have the number the operator entered in there.
thanks
Thread: M1nn passing a variable question
Results 1 to 3 of 3
-
10-22-2010, 06:52 PM #1
Registered
- Join Date
- Feb 2007
- Posts
- 4
M1nn passing a variable question
-
10-23-2010, 02:03 AM #2
Registered
- Join Date
- Feb 2007
- Posts
- 4
-
10-23-2010, 05:15 AM #3
Gold Member
- Join Date
- Apr 2005
- Posts
- 1778
Thanks,
I don't need this right now but I can definitely see using this info in the future.
Alan
Reply With QuoteSimilar Threads
-
Passing profile to a macro
By Dam in forum Parametric ProgramingReplies: 2Last Post: 05-28-2010, 05:02 PM -
Passing Geometry back and forth between Cad and Cam
By Mike RZMachine in forum Dolphin CAD/CAMReplies: 4Last Post: 10-13-2009, 02:31 PM -
EMC2 variable pitch / variable diameter threading.
By samco in forum MetalWork DiscussionReplies: 0Last Post: 03-09-2008, 07:40 PM -
Another Variable speed question
By wcarrothers1 in forum Bridgeport / Hardinge MillsReplies: 1Last Post: 05-31-2007, 03:24 PM -
passing arguments to a sub program
By kiprip in forum Mazak, Mitsubishi, MazatrolReplies: 1Last Post: 07-13-2006, 05:11 PM
Posting Permissions
