[straykiller]

hello im new here and also very new to cnc mills i found one i am interested in buying and it seems like it is in good shape. it is a Shizuoka ST-N with a bandit controller. the seller said he thinks that there might be power supply problems with the controller. so i was wondering if someone here could help me understand what it would take to retrofit it with a new controller. could i possibly buy new servo motors and geckodrives and just run it from a pc. any help would be much appreciate. thanks alot

justin

[DEMAC]

search on "buildyouridea.com"-very smart people

regards

[gothdragon]

you can buy new contraller do not get thim off ebay
i did and im regreating it big time i been told geko was the best im new allso so don't take my word on it but there is alote of site's that have thim
i built my cnc by hand got motor's power and contraler off ebay

[kirk_wallace]

This is a little late, but you can see what I have done here:
Conversion of Shizuoka ST-N from Bandit Stepper to EMC2
--
Kirk Wallace
Kirk Wallace's Machine Shop
E45 Pine Mountain Lake Airport Webcam
California, USA