We have a Mori MV JR with a Yasnac MX2. Have it set up with RS232, works well but we keep filling up machine memory. Does anyone have any info or procedure to drip feed from PC?
Thanks
We have a Mori MV JR with a Yasnac MX2. Have it set up with RS232, works well but we keep filling up machine memory. Does anyone have any info or procedure to drip feed from PC?
Thanks
You should be able put it in tape mode and run dnc from the computer hooked up to rs232 via Cimco or other editor. While in tape mode push cycle start button and code will be read from dnc. Depending on comm. settings machine or computer start first.