[nabil_elbadri]

hi gents
i have two cnc sinumerik 810M& 810T didn't work about 3 years so the battery lost and expired, now I need to replace the batteries but as u know all the parameters has been lost,when i switch on the machine either the milling or the lathe I find the:
general data .
axial data 1.
axial data 2.
spindle data.
machine bits.
all empty no digits or IO's and I don't have any back up for this.
so I need if any one can help me to get these data, pm or give me a link .
and how to back up the machines through the RS232 cable , because i have these machines already connected to the cad/cam lab.
thanx in advance for any help

[erdinct]

can u write product name and can u show machine photos..

[nabil_elbadri]

thnx for ur reply
but i don't have photos,sorry
about the product name i didn't understand what u mean by product name,
if u mean the machine builder it's EMCO VMC
hope this helps
thnx

[erdinct]

i will send some parameters maybe useful for you

[nabil_elbadri]

thank u very much
please do ur best to send me all necessary parameters
i am waiting to ur reply

[savasa]

hi friends,
I have a cnc sinumerik 810M too (famup mcx 700),and it didn't work about some years so the battery lost and expired,and all the parameters has been lost,
and I don't have any back up for my machine.
Is anybody can help me to fix it or find a backup software?
tnx freinds

[Machineit]

If you lost battery power, you lost not only the parameters, but the commissioning data too.

I have it for the 810-T on a Hardinge Lathe, but not 810-M. Let me know if that will help. Otherwise contact Siemens for help. I know a tech for Hardinge and he may know the 810M, but he is in Florida.

Mike

[savasa]

tnx for answer. Attachment 215546i restart it by using an instruction from sinumerik manual today and this page appear. do you know what it means? i think it lost its eprom. do you have any idea about it?

[Machineit]

It has lost all parameters and commissioning data and has no idea what to do. You need to start with replacing that.

[savasa]

tnx alot Machineit for your answers.
is it happen because of that restart?
and another question is there anyone that have electronical map of famup mcx 700 and sinumerik 810M?

[Machineit]

I very much doubt you will find help here, but I would go to the manufacturer and try. It is the combination that you need, machine and controller.

Emco Famup S.r.l. in Italy

Mike