Aspire has an .ISO post for my machine but when I open the files in biesse works it only shows geometry no tool and no depth of cut. Can anyone help me not to have to buy mastercam? I need to do some 3d cutting.
Aspire has an .ISO post for my machine but when I open the files in biesse works it only shows geometry no tool and no depth of cut. Can anyone help me not to have to buy mastercam? I need to do some 3d cutting.
Not sure if i can help but this is how i use the software to run on a Biesse router.
I create my work and toolpaths as normal
I then choose Save Toolpaths option within Ventric and select Biesse Rover Arcs (MM) (*.*)
I then open this file with Editor on the PC attached to the Router and immediatey hit save in Editor which allows me to draw a sample of the design. If you dont hit save first it doesnt work.
I then select the file and run it.
hi, my friend , who need
surfcam 2015
gibbscam 2015
mastercam x9
ArtCam Pro
EdgeCam
Hypermill
PowerMILL
Surfcam
UG NX
I have a lot of cracked software , I sell it
I have email :[email protected] [email protected]