[robyward]

We put together this little video of me and a mate assembling a MakerBot CupCake CNC 3D Printer. Didn't take us long to throw it together but we had a few problems with the MK4 extruder. MakerBot have now released a MK5 extruder which should be a fair bit better.

Video: [nomedia="http://www.youtube.com/watch?v=rXRvaIBcD-E&feature=player_embedded"]YouTube - Makerbot Cupcake CNC build - 3D-printers.com.au[/nomedia]

See the full write up at: Makerbot CupCake CNC Build Video | 3D Printers Australia

[bhatthimanshu]

Hello Guys,
I made a machine for Rapid Prototyping, 3d Printer stereolithogrphy.

have a look at it..

please check working video of the machine.

[ame=http://www.youtube.com/watch?v=-Vu_agjDWKg]3D Printer, Stereolithography India - YouTube[/ame]


Photographs of jewellary parts produced by machine:
https://picasaweb.google.com/1002574...eat=directlink

Photographs of machine internal and external:
https://picasaweb.google.com/1002574...eat=directlink


Specification of the machine:

Technical data:
Laser source: DPSS UV Laser 405nm
Scanning method: High Speed Galvo mirrors
Working area (x, y, z): 110 x 110 x 200 mm
Slice thickness*: 0.01 – 0.10 mm
Laser scanning speed: 0-4400 mm/sec
Software : Proprietry
OS: Windows 7, WinXP, Linux support in near future
Input file format:
.stl - .slc, .mkr(DWSSystems format), gcode
Machine size: 380 x 515 x 733 mm
Weight: 50 Kg
Temperature Range: 22-25°C
Humidity Range: 60%
Electrical consumption: 400 W
Power supply: AC 230/115 V / 50-60 Hz

if any question ask me on [email protected] or [email protected]

NOTE: i dont find a link to start new thread so i posted it here. Sorry if i divert the discussion..
Thanks,
Regards,
Himanshu