I have just bought a used Mori CL200 that has a Mitsubishi controller on it (MSC-803). Going through the operation manual it seems as though I am missing a "Tape mode" button on the soft touch. There are other buttons missing for features I don't have (like a parts catcher etc...), but I would have though that a tape mode would have been a standard thing on a machine by 1998.
Maybe I'm missing something? The machine does have an RS-232 port.
I have been finding that this Mitsubishi controller is a real pain to get any kind of documentation on.
Regards,
Results 1 to 2 of 2
-
11-18-2010, 07:29 AM #1
Registered
- Join Date
- Nov 2010
- Posts
- 0
Drip feed CL200B and MSC803 controller
-
11-18-2010, 02:48 PM #2
Gold Member
- Join Date
- Mar 2003
- Posts
- 2932
Mitsubishi puts many of their manuals on the web.
Mitsubishi Electric Automation Inc. - Manuals Search
Reply With QuoteSimilar Threads
-
Drip Feed to a Kiwa Colt Fanuc O-M controller
By mud-usa in forum FanucReplies: 0Last Post: 05-05-2010, 01:43 PM -
Drip feed or DNC
By airlid in forum Mori Seiki MillsReplies: 2Last Post: 02-18-2010, 12:19 AM -
Drip Feed into a Fanuc 11MA Controller on Bridgeport R2G4 V Mill
By leeputman in forum MastercamReplies: 9Last Post: 04-28-2008, 06:10 PM -
confirguring OM controller for Drip feed
By DerHammer in forum FanucReplies: 2Last Post: 08-16-2007, 03:51 AM -
Drip Feed
By camtd in forum SurfcamReplies: 0Last Post: 08-01-2006, 12:09 AM
Posting Permissions
