picked up a used MAxNc a couple of years ago and has sevrved me well for basic engraving but I am limited to the basic font characters that came with the machine. I would like to know if there is a good engraving program available that will work with this unit. The unit is a maxnc 10 open loop system, I would also like to upgrade to a closed loop system and update the computer with something a bit newer than Windows 98. the previous owner already upgraded the motors.
I have tried to contact MaxNc several times with no luck, I thought I would keep buisness local if I ever needed help or assistance.
I would also would like to offer engraving for customer supplied artwork something that I could scan and upload to the CNC, I have been told that Corel Draw will work for this application.
Any help would be greatly appreciated.