I stripped a HP laserjet 1010 printer and got this stepper motor out of it.

Its a MITSUMI M49SP-2K LF 7.5 degree step

I would like to know what type of motor is this and how do I build a controller for it.

This is my first build.

I want to build a small plotter

http://i234.photobucket.com/albums/e...9112010464.jpg
http://i234.photobucket.com/albums/e...9112010463.jpg
http://i234.photobucket.com/albums/e...9112010462.jpg

This is the info i got about the motor

SPECIFICATIONS
Stepping Motors
Items M49SP-2K
Rated Voltage DC 24V
Working Voltage DC 21.6~26.4V
Rated Current/Phase 1A(PEAK)
No. of Phase 2 Phase
Coil DC Resistance 4.6Ω
Step Angle 7.5°/step
Excitation Method 2-2 Phase excitation (Bipolar chopping driving)
Insulation Class Class E insulation
Holding Torque 134mN·m
Pull-out Torque 100mN·m/1100pps
Pull-in Torque 102mN·m/250pps
Max. Pull-out Pulse Rate 2150pps
Max. Pull-in Pulse Rate 430pps

Thanks