Hello
Im running a huge cnc machine with chains and sprockets, my old electronics was to weak so i bought new drivers and steppers with 425 oz-in and after testing it it works really good.
Now i need do the math, im looking for 1/16 steps since that is what i want and had earlier but the drivers looks different from what im used to (see attached image).
On the drivers i had before the microsteps was 1/2, 1/4, 1/8, 1/16 etc but on the new ones its 400, 800, 1600 and all the way up to 25000 Steps/rev
Im confused, what setting is close to, or is 1/16
Thanks
Janne