586,103 active members*
3,389 visitors online*
Register for free
Login

Thread: Small quantity aluminum part wanted

Results 1 to 3 of 3
  1. 11-29-2010, 04:17 AM #1
    siberia37
    siberia37 is offline Registered
    Join Date
    Nov 2010
    Posts
    0

    Small quantity aluminum part wanted

    I would like to get some quotes on getting this seemingly simple part machined. The part is for a 4x5 view camera that is no longer produced.

    It's basically a 0.5 inch alumnium rod with a 0.25 inch deep slot cut into it. The width of the slot is 0.10" inch at the top of the slot and 0.09" at the bottom. So it's slightly tapered. The overall length of the rod should be 6 inches. I can provide the existing part as a guide. Can anyone give me some preliminary estimates with the information provided?
    Attached Thumbnails Attached Thumbnails focus_rod.jpg  
    Reply With Quote Reply With Quote
  2. 11-29-2010, 10:27 PM #2
    siberia37
    siberia37 is offline Registered
    Join Date
    Nov 2010
    Posts
    0
    Just to clarify I am just looking for one part. Thanks.
    Reply With Quote Reply With Quote
  3. 12-02-2010, 01:26 AM #3
    siberia37
    siberia37 is offline Registered
    Join Date
    Nov 2010
    Posts
    0
    Thanks all I have found someone to work with.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Small (8cm x 8cm x 3cm) aluminum part for poor college student =)
    By cromas in forum Employment Opportunity
    Replies: 7
    Last Post: 07-31-2008, 06:41 AM
  2. RFQ - Small CNCed aluminum part, batch of 50
    By Enraged in forum Employment Opportunity
    Replies: 29
    Last Post: 01-22-2007, 02:26 AM
  3. small quantity plastic source?
    By zcases in forum Glass, Plastic and Stone
    Replies: 7
    Last Post: 01-02-2007, 06:20 PM
  4. where to get small quantity of material?
    By pp-TG in forum MetalWork Discussion
    Replies: 3
    Last Post: 12-08-2006, 02:56 PM
  5. RFQ - Small production run of aluminum part - European Machine Shops Only Please
    By jayd in forum Employment Opportunity
    Replies: 2
    Last Post: 04-30-2005, 11:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules