Hi!
First of all I'm new to this forum and my experience with cnc is restricted to a DIY conversion of a smaller workbench mill. Anyway some time ago I bougth my self a Storebro Combi-Mill with Sinumerik 3M controller. The machine works fine but i have not succeded in communication (data input/Output) between my laptop and the Siemens controller. Can anyone tell what the I/0 settings should be in the laptop COM port and are there any settings to check in the controller.
When i opened the PC-cabinet I also noticed that a red led "Pheripery fault" is on, does anyone have any clues on this one, I haven't noticed any malfunctions except for that I can't get the communication to the laptop working.
Any help would be appreciated.