Hi,

I was hoping someone here might be kinda enough to help me.

We are using a Holzma Optimat Beam Saw with CADmatic v3.0.

We did a server migration a few weeks back and set everything back up the way it was originally (we thought), as far as the beam saw and our server was concerned.

But now we have a problem with the program depository on the server filling up and our operator has to sift through all the programs we "send down", as CADmatic will no longer delete the programs after they have been converted and loaded into the saw.


If anyone has any experience with CADmatic v3.0 or even a user/operation manual, your help is very much appreciated!