I'm new to Cut 3D and having a small issue I'm sure someone can help with. I'm trying to cut a model airplane wing. There is a upper and lower half. In cad I built the lower half in a BOX 12" x 45" x 3". The wing loft is flush to the top of the box. When I import to Cut 3D the box and wing mold look perfect. The problem is the finish cut preview wants to cut away all of the box right up to the wing loft and not leave the box. What am I doing wrong???
Anyone out there who can help me out? I'm sure it's a simple fix. I've tried using various margins from "0" to 2" but nothing works.
HELP!!!!!!!!!!!
I have attached the DXF file for review
Thread: Cut3D not seeing the BOX!
Results 1 to 2 of 2
-
12-11-2010, 12:22 AM #1
Member
- Join Date
- Jun 2009
- Posts
- 110
Cut3D not seeing the BOX!
-
12-11-2010, 04:13 PM #2
Registered
- Join Date
- Oct 2009
- Posts
- 9
Go back to step two in Cut3D and set the "Depth of Model below Surface" hope this helps
Reply With QuoteSimilar Threads
-
Cut3D for Bridgeport Mill?
By dirtdiggler in forum VectricReplies: 7Last Post: 06-30-2009, 08:45 PM -
MeshCAM vs. Cut3D
By henryj in forum VectricReplies: 9Last Post: 06-16-2009, 06:09 PM -
Anyone have Cut3d problems?
By CROSSHATCH in forum VectricReplies: 16Last Post: 12-22-2008, 07:40 AM -
Cut3D and a Spiral Saw Bit
By bsimages in forum VectricReplies: 2Last Post: 07-06-2008, 09:48 AM -
3D DXF with Cut3D
By Switcher in forum VectricReplies: 4Last Post: 04-25-2008, 11:46 AM
Posting Permissions
