[brandou10l]

[nomedia="http://www.youtube.com/watch?v=Bmba3X4mPQc"]YouTube - CNC HIGH SPEED MACHINING[/nomedia]

using a hanita 5flt varimill-2 3/4 dia .06 corner rad 650sfm .008 in/tooth
1.1 doc about 11cu/in mrr

doosan dhp5100 40taper

we got 14 parts before the tool got dull which is about 140 min tool life

this dynamic path is bada** although its not new to mastercam x5 just thought i would share
i've been using this dynamic milling path in my programs for a whiile now and you can take the biggest pos machine and just hog the hell out of steel we have a 40taper horizontal with 10hp and got a 11 cu/in min mrr in 4340 225bhn!!

[carbidecraters]

Nice vid! I bet you could even tighten up that extra travel. Part run analysis shows that dynamic toolpath is faster and tooling lasts longer. Nice job please post moe videos.

[rusty abe]

Very informative. That is what i am looking for. Last time i didn't so fortunate. My Hanita finish, 4 flute got chipped on the corner when i was trying ramping down. Maybe my ramping was too aggressive. Keep on posting vids.

regard,
rusty abe

[Aquatic]

Nice

I will look into using this.
I particularly like the 2 different rapid movements for internal and external corners.
I wonder if this would work on a Haas with a dogleg rapid move?

Thanks for that

C

[cadcam]

Do a search on you tube there are a few of these videos for this option of path. Dynamic pocket is another like this.Look in to that to.

[rusty abe]

Hi everyone,
Does anybody could give me a rough idea how much to spend on original mastercam 9. I am thinking to get one for myself, so I can work part time job.
Thanks,
rusty