Does anyone know how do I enable the G83 cycle in our Romi Cosmos 20-U lathe with Fanuc 18-T control?????
It was working perfectly before the motherboard broke up, and after they changed it, some features were disabled, like the G83 cycle, copying and pasting programs, some comands like "GOTO" and more.
If somebody knows how to enable it I would be thankful. And sorry about my English.
Thread: Fanuc 18-T G83 cycle enable
Results 1 to 2 of 2
-
12-25-2010, 10:13 PM #1
Registered
- Join Date
- Dec 2010
- Posts
- 0
Fanuc 18-T G83 cycle enable
-
12-27-2010, 08:32 PM #2
Gold Member
- Join Date
- Jun 2008
- Posts
- 1511
Do you have the parameter list before they changed the motherboard? If these options were enabled before the they changed out the MB then you should be able to reload the original parameters via RS232 and power cycle the machine. If you do not have the original parameters then send me your option parameters via PM and I will take a look at them.
Stevo
Reply With QuoteSimilar Threads
-
Enable shift key for Fanuc 6M.
By ckirchen in forum FanucReplies: 3Last Post: 02-04-2012, 11:13 AM -
FANUC 10T G76 cycle
By wuwear in forum FanucReplies: 10Last Post: 03-03-2010, 02:51 PM -
Fanuc OT-C and G71 Cycle
By rrbmachining in forum FanucReplies: 7Last Post: 11-24-2009, 11:55 AM -
repetitive cycle on Fanuc 21 TA
By DHYSTA in forum FanucReplies: 11Last Post: 08-17-2007, 02:46 AM -
Spindle enable alarm Fanuc OTB
By hien100881 in forum CNC (Mill / Lathe) Control Software (NC)Replies: 3Last Post: 01-21-2007, 08:29 AM
Tags for this Thread
Posting Permissions
