586,108 active members*
3,214 visitors online*
Register for free
Login

Thread: Servo Is On warning ?

Results 1 to 3 of 3
  1. 01-06-2011, 05:20 AM #1
    Ken_Shea
    Ken_Shea is offline Registered
    Join Date
    Apr 2003
    Posts
    1873

    Servo Is On warning ?

    When attempting to change parameter 57 bit 7 to 1, it fails to input the number and flags "Servo Is On"

    Any ideas on that.

    All else seems to operate normally.

    Ken
    Reply With Quote Reply With Quote
  2. 01-06-2011, 06:07 AM #2
    Geof
    Geof is offline Gold Member
    Join Date
    Jul 2005
    Posts
    12177
    To change Parameters you have to turn Setting 7 OFF and press the E-Stop button.
    An open mind is a virtue...so long as all the common sense has not leaked out.
    Reply With Quote Reply With Quote
  3. 01-06-2011, 06:11 AM #3
    Ken_Shea
    Ken_Shea is offline Registered
    Join Date
    Apr 2003
    Posts
    1873
    Quote Originally Posted by Geof View Post
    To change Parameters you have to turn Setting 7 OFF and press the E-Stop button.
    Had it unlocked but totally forgot about the E-Stop.

    Thanks much
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. MC x3 Warning
    By jimmiethekid in forum Mastercam
    Replies: 2
    Last Post: 05-13-2010, 05:03 AM
  2. ShopCam Warning !!
    By routerman in forum Shopsabre
    Replies: 11
    Last Post: 11-26-2009, 12:11 AM
  3. W05 WARNING FEEDRATE
    By guydrisc in forum Okuma
    Replies: 4
    Last Post: 06-16-2009, 04:28 AM
  4. Warning!
    By andy.f in forum MetalWork Discussion
    Replies: 2
    Last Post: 01-25-2008, 04:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules