We have an Alpha T10-B Robodrill with a 16-MB control. This machine sat in our warehouse for years and had lost all of the SRAM. I had backups of th NC parameters and the Pitch Error Comp, but no back ups of the PMC parameters or O9000 macro subprograms.

Methods Machine helped me out with the PMC parameters from a simular machine, but I still don't have all of the Macro subprograms. This machine also has a pallet changer.

If anyone has copies of the macro subprograms for a T10-B Robodrill (1995 era) I would surely appreciate a copy.

Thanks,
Adam