[Baldo]

Please I need your help.

I replace the V3-40K AUTO Card
but the machine does not responding, I can't move the axes
and the control only shows this error " APPUYER SUR LE BP VOYANT ROUGE"

I have tried to load the parameters, but I have not all the files.
in the procedure for loading the parameters that refers to utilities files
called UTIL0 and UTIL6, but I have not this files.

Thanks for any help...

[ukr]

Hello.

(1)
----------------------------------------------------------------------------------------------------------------------------
I have problem with lost UTILITES on NUM-750 (machine REALMECA-C200V),
such as at post#35 (from ramley,03-21-2011) here--> http://www.cnczone.com/forums/commer...tml#post915257

Startup screen is similar to:


And I have tape-reader with lost tape coming with this machine.
I don't know is it possible to use the set of utilites from another NUM-750 CN control (parameters no, of course).
If its possible - I needed in binary utilites files
(e.g. UT00.BIN,...,UT13.BIN as described at http://www.num-usa.com/EN_Tips/INTRE...tilityLoad.pdf).


(2)
----------------------------------------------------------------------------------------------------------------------------------------
After that - lost parameters on this NUM-750 REALMECA-C200V. Backup tape is missing (lost).
Situation like as at post#37 (from Badlo,05-12-2011) here--> http://www.cnczone.com/forums/commer...tml#post939765
Please help with detailed parameters manual and/or backup disks/files for this machine (NUM-750 REALMECA-C200V).
(Backup/Restore procedure described at http://www.num-usa.com/en_tips/intre...up_Restore.pdf)

On original NUM-750 cnc software disks must be present all of this, including utilites from above(1).


----------------------------------
Thanks for any help.

[ukr]

See my message #42.
Startup screen is:

[krynia]

Hello.
I am new in this forum.
I have similar problem like @ukr.
My machine is "routron921s" with num 750f controller.
I don't have UTILITES in RAM. And I have also other problem. When I try go to "direct PC dialogue" in I/O I have nothing on the screen. Some guy told me than I must restore the PLC . This is true?
I don't have any backup.
Can anyone help me?
My e-mail addres: [email protected]

[DanielPereira]

Hello, Have you solved your problem? I can send you some backup files from my NUM750.

[ukr]

Hello, Have you solved your problem? I can send you some backup files from my NUM750.

No. This problem not solved, insofar I know (I'm working now at another place).
But shall is thanked if You send me this files.

Share it, please, at RGhost — файлообменни� �º if it possible.

[DanielPereira]

Here is:
TN1-SerialNumber463-26_06_1989.rar — RGhost — файлообменни� �º

link with 90 day of lifespan

[ukr]

Here is:
link with 90 day of lifespan

Thanks a lot, Daniel..

[ravenforwolf]

Hi to all.
Have a LFU 3000 with NUM 750 ZAYER milling machine. Recently i was able to receive programs from machine,made a backup before changing the proces card. From then i canot receive programs from machine, but can send programs with no problem!
Is there a missing file , or a macro?