Hello. At me is HURCO BMC-25 Ultimax2. In manuals it is not specified as to create the program in G-M Code. Help please with the information. What commands are used, and as the shot, the program is formed.
How it is possible to keep parametres CNC on a diskette?
Where it is possible to take numbers and the description of parametres? I wish to increase a range of movement Z Axis. And to calibrate all Axis. I will be very grateful to you for any information. Best Regards.
Thread: Hurco BMC-25 Ultimax-2 G Code
Results 1 to 2 of 2
-
01-17-2011, 03:28 PM #1
Registered
- Join Date
- Aug 2007
- Posts
- 22
Hurco BMC-25 Ultimax-2 G Code
-
01-18-2011, 05:45 PM #2
Registered
- Join Date
- Jan 2009
- Posts
- 25
If you don't have ISNC the code is very similar to an old Bridgeport code. The z depths on a drill cucle is unsigned incremently from where you are starting and the I's and J's on arcs are absolute values...
VISIT HURCONOTES.COM FOR HURCO CNC PROGRAMMING TIPS
Reply With QuoteSimilar Threads
-
SOLVED...Hurco 40 SLV, Ultimax 3
By SINUMERIKO in forum HURCOReplies: 1Last Post: 02-25-2020, 03:47 PM -
Hurco Ultimax II
By gregm1976 in forum CNC (Mill / Lathe) Control Software (NC)Replies: 15Last Post: 12-23-2011, 08:11 AM -
Hurco BMC 20 - Ultimax 3
By arvishal in forum HURCOReplies: 1Last Post: 10-03-2008, 08:57 PM -
Ultimax 3 for Hurco
By Nong Noy in forum Post Processors for MCReplies: 0Last Post: 08-16-2008, 04:02 PM -
Hurco KM3 w/ Ultimax
By Mr. LocoMartin in forum HURCOReplies: 1Last Post: 01-14-2008, 03:18 PM
Posting Permissions
