[echojdlaser]

Hello everyone,

Have a wanderful day.

May we know your experience of Materials, Max. cutting depth which laser tube do?

Such as,

Acrylic,

60W CO2 laser tube, cut max. 7 or 8mm
80W co2 laser tube, cut max. 15 or 16mm
180W co2 tube , could cut max. 30mm

Wood, leather, rubber, and so on,

May we know your idea?

Miss Echo

[Tweakie]

I cut 6mm acrylic with 30 watts.
I can cut up to 10mm but the sides start to show barreling using a 50mm FD lens.

Tweakie.

[echojdlaser]

Yeah, the could try to test it by different laser power, speed.

We believe the machine will bring us miracel.

Before, we have tested 20mm acrylic cutting by 80W. It is a little barreling.

Do you have some idea on leather cutting? Tweakie. Some leather laser cutting, the edge of cutting area maybe black if cutting deeper? How do you deal with the black parts.

Regards

Echo

I cut 6mm acrylic with 30 watts.
I can cut up to 10mm but the sides start to show barreling using a 50mm FD lens.

Tweakie.

[Tweakie]

Leather stinks.
The smell is so bad it lingers after the extraction system has been shut down so in my book leather and pvc are both no go areas.

Tweakie.

[echojdlaser]

Do you have some idea on leather cutting depth ?

Have you tried 5mm hard leather cutting? which laser power you use?

Echo

Leather stinks.
The smell is so bad it lingers after the extraction system has been shut down so in my book leather and pvc are both no go areas.

Tweakie.