586,080 active members*
3,513 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > CNC Machine Related Electronics > How to wire stepper motors to tb6560 board

Thread: How to wire stepper motors to tb6560 board

Results 1 to 2 of 2
  1. 01-23-2011, 06:23 PM #1
    minga86
    minga86 is offline Registered
    Join Date
    Dec 2010
    Posts
    0

    How to wire stepper motors to tb6560 board

    I bought a 4 wire stepper motor & tb6560 driver board from ebay, and it arrived with the stepper motor shaft sticking thru the install. c.d. I looked up the stepper motor and found that the green and black wires go to 1 coil and the red and blue wires go to the other. I need help figureing out where they go on the board. Specifically on the a, a-,b,b- The model # on the stepper motor is 57bygh56-401a 1.8 fh no;10.11.10 I'm a total elec noob so any help would be great . thanks
    Reply With Quote Reply With Quote
  2. 01-23-2011, 08:22 PM #2
    cliffy
    cliffy is offline Registered
    Join Date
    Jun 2006
    Posts
    47
    Is this the file you need?

    Edit

    I tried to make an attachment and give you the Doc, but it didn’t work.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. TB6560 board and motors (ebay)
    By cerberos in forum Stepper Motors / Drives
    Replies: 8
    Last Post: 08-13-2010, 04:48 AM
  2. How to wire my motors power supply and controllers with breakout board
    By madaxe in forum CNC Machine Related Electronics
    Replies: 6
    Last Post: 05-01-2010, 12:30 PM
  3. Wire stepper motors to G540
    By microbeast29 in forum Stepper Motors / Drives
    Replies: 5
    Last Post: 02-08-2010, 11:22 AM
  4. Wanted DIY stepper driver circuit for 6 wire stepper motors
    By Colin300 in forum Australia, New Zealand Club House
    Replies: 5
    Last Post: 09-21-2007, 03:20 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules