We have a horizontal Mori Seiki NH 4000 with a popup tool length settor.
It has been bumped and is out of square in x aprox .015 thousands.
How can we realign it. It is fine in the Y (vertical) direction.
Thanks
Scottyb
We have a horizontal Mori Seiki NH 4000 with a popup tool length settor.
It has been bumped and is out of square in x aprox .015 thousands.
How can we realign it. It is fine in the Y (vertical) direction.
Thanks
Scottyb
Should be able to just loosen it at the mount and square it up..