[GuiBerlin]

Hello

I got one of those dxf puzzle and I have a "question".

Ok what I need to do is to scale a part (a line between 2 dots) because the material I use is thicker.

I downloaded Doublecad XT but since I am only engraving stamps with my laser I am (totally) lost with CAD softwares...

So here is what I would like to do :



my problem is that I am doing that :



So If someone could explain to me how to do that I would be really thankful :-)

[zax15uk]

I am not familiar with DoubleCAD but in most programs you can subtract an element from another. So I would create a rectangle you want to remove and use boolean substract from the original shape.


Zax.

[GuiBerlin]

Yes !!!!!!!

I did it !!!!!

:cheers:

Merci Zax !!!!

[gmfoster]

Another thing that is done is scale the whole thing up till the slot fits your material. Sometimes the larger material need to make a larger model to look right.

[zax15uk]

gmfoster makes a very good point - simply enlarging the slots may not produce the best results.

Zax.

[GuiBerlin]

That makes sens :-)