Ive looked and cant find any specs on these products.

I have a sanyo-denki 730L 039 e84 dc servo motor Super L
250w 32v 10.5A 2200 rpm

The encoder has this on it

LOW 025 2C
4805 100 26B
nidec nemicon OY
Do these numbers mean anything?

I cannot find any information on the encoder or the motor.
Need to figure out so I can buy the gecko 320x driver.
I want to see if it is compatable or if I need to figure out a solution

I do not have a scope.
Thanks
EZ