If I import a part from AutoCad, it does not seem to have a surface. JUst the lines that make up the part. How would I go about after I have joined or grouped the lines to get the surface so I can extrude the part as a solid? I can extrude the part as isbut it is hollow inside. Just haveing the extruded lines forming and empty wall. Thanks.
Thread: Outline
Results 1 to 2 of 2
-
07-14-2003, 11:24 PM #1
Registered
- Join Date
- Jul 2003
- Posts
- 148
Outline
-
07-15-2003, 05:17 AM #2
Moderator
- Join Date
- Apr 2003
- Posts
- 1357
Make sure to set the option "cap = yes" in the extrude command. The extruded lines will then become a solid.
Dan
Reply With QuoteSimilar Threads
-
Looking for Eagle head outline g-code
By CerveloRod in forum G-Code ProgramingReplies: 1Last Post: 06-03-2005, 06:28 PM -
Smooth outline and pockets
By pauls in forum BobCad-CamReplies: 0Last Post: 01-17-2005, 02:02 AM -
Circuit-board, design software.
By ynneb in forum CNC Machine Related ElectronicsReplies: 123Last Post: 08-02-2004, 10:40 PM
Posting Permissions
