Hello All.
I have a Mori-seiki TV-300 with a MSC-802M control.
The alarm on the screen is S01 SERVO ALARM 17.
The drive unit is a Mitsubishi MDS-A-SVJ-10 with is also showing the alarm 17.
The alarm was raised a few weeks ago but I have left it untill now untill I have replaced the batteries in it.
On the servo screen, the AMP DISP. is 17, the other three are E7.
On the abs-srv screen, the "state" is OK along with the other three.
Does anyone know what this alarm means with possible causes and hopefully a remedy?