Here are a couple of screenshots of a scan done on a Shop Sabre machine today with a touch probe. The scan was done across X and on a rotary axis. It took about 5.5 hours. I don't know the exact settings that the operator used, but since it's an archery bow grip and a smallish item I'd say the increments were pretty small.
I ran the stl file through Rhino and surfaced a couple of views to get the screenshots.
Results 1 to 2 of 2
-
02-03-2011, 04:11 AM #1
Registered
- Join Date
- Apr 2008
- Posts
- 10
Rotary scanning with a touch probe.
-
02-28-2011, 06:41 PM #2
Registered
- Join Date
- Apr 2008
- Posts
- 10
Nice!!
Here is a cut and the original. Looks pretty good to me.
Reply With QuoteSimilar Threads
-
3d scanning probe multiaxis
By hpghost in forum Digitizing and Laser DigitizingReplies: 7Last Post: 07-17-2023, 11:12 AM -
Touch Probe
By Babba in forum Syil ProductsReplies: 15Last Post: 03-11-2022, 04:36 PM -
touch probe
By mick.w in forum CNC (Mill / Lathe) Control Software (NC)Replies: 0Last Post: 01-29-2011, 06:45 PM -
using touch probe for scanning guitar surface
By awe_indo in forum Musical Instrument Design and ConstructionReplies: 4Last Post: 10-21-2010, 11:34 AM -
cnc touch probe
By shawnc515 in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 09-30-2010, 11:10 PM
Posting Permissions
