Im trying to run a probe z touch mazatrol sub program from an EIA Pgm. I just need to know if there is a way of running the mazatrol sub without an X and Y location? Its on a Nexus 510c 640 fusion control. No inspection plus or id use that.
Thanks any help would be greatly appreciated
Sent from my DROID2 using Tapatalk
Thread: Mazatrol sub program in EIA
Results 1 to 2 of 2
-
02-07-2011, 04:03 PM #1
Registered
- Join Date
- Mar 2008
- Posts
- 7
Mazatrol sub program in EIA
-
02-07-2011, 08:03 PM #2
Registered
- Join Date
- Sep 2008
- Posts
- 51
You can run the Mazatrol probe program as the main program, then run the EIA program as the sub-program. This works for me. If you use the WPC in Mazatrol, you can remove any fixture offsets (G54-G59,G92,ect.) from the EIA program.The EIA program will follow the WPC from Mazatrol program. This would be on an M32 control.
Good Luck!
Reply With QuoteSimilar Threads
-
I could REALLY use a sample EIA-ISO program for my Mazatrol Cam T-2!
By revlimit in forum Mazak, Mitsubishi, MazatrolReplies: 6Last Post: 05-02-2014, 05:40 AM -
Mazatrol Program into a G Code Program
By fuzzman in forum Mazak, Mitsubishi, MazatrolReplies: 15Last Post: 09-25-2012, 04:27 PM -
Mazatrol Sub Program
By jhersh in forum Mazak, Mitsubishi, MazatrolReplies: 2Last Post: 12-03-2008, 11:09 AM -
Restarting in mazatrol program
By Castle1 in forum Mazak, Mitsubishi, MazatrolReplies: 16Last Post: 07-04-2007, 12:43 AM -
Need IEI-ISO sample program for Mazatrol 640 T
By turkaygeyik in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 05-29-2007, 03:03 PM
Posting Permissions
