Hi all,
Let me start off I am a total Noob have no CNC back ground at all.
The controller is a Centroid M50
Went to use my mill tonight for a project all was going well till I went to turn on the spindle. Soon as I pushed the start button the spindle started and immediately stopped. It locked up the machine and would not let me move anything. It gave me a 404 spindle error code.
I restarted the machine and was able to Home it all was working fine until I pushed the spindle start and got the same code.
My Manual for the controller has no trouble shooting and I can not find anything on the web about this.
I would appreciate any help
Thanks