hello all
I have everything ready to roll on my Arrow 500 with my new power supply and spindle drive
I’ve loaded the tools and aligned the machine but, when I tried a tool change command, the spindle rotated about 90 degrees off the align position (didn’t crash… kept my eye on it)
Normally, the spindles align position and the tool change position are the same (or very close).
Is this a parameter that needs to be changed with MotionLink Plus or do I need to reposition the spindle drive belts to let the drive think it is in tool change position or is this a parameter of the A2100 that needs changed? (6000 RPM high torque spindle)
OR should i follow the advice in the attachment in this link - http://www.cnczone.com/forums/cincin...dle_motor.html
thanks for any advice
Mac :cheers: